The Taiwan MMD company, releasing Philips-branded monitors, is going to start delivering the Momentum 436M6VBPAB display, based on the 43-inch VA matrix with the 3840 x 2160 pixels resolution. The novelty is distinguished due to the Adaptive-Sync technology support and DisplayHDR 1000 certification.

 

The manufacturer designed Philips Momentum 436M6VBPAB to act as an analogue of UHD-TV-sets. The refreshment rate makes this device attractive for PC gamers and playstations owners.

 

Philips Momentum 436M6VBPAB ensures the 97.6 % covering of the DCI-P3 colour gamut, while featuring the 1000 cd/m² peak brightness, 50 000 000:1 dynamic contrast and 4 ms response time. In the meantime, the display update rate is limited to 60 Hz. Image output is conducted via HDMI 2.0, DisplayPort 1.2, Mini DisplayPort and USB Type-C ports. The specialty is also supplied with 7 W speakers and the USB 3.0 hub.

 

Philips Momentum …

In the pursuit for the state-of-the-art technological tendencies, a lot of manufacturers sometimes forget about the needs of their customers. Still, there are some companies, like Viewsonic, that never sacrifice the longing of their potential audience for convenience and performance, by delivering only high-quality and targeted products. Monitor VX2770Smh-LED from Viewsonic is one of such products that is intended specifically at PC users, satisfying their basic needs and even surpassing their expectations.



Design and Ergonomics


Viewsonic VX2770Smh-LED is a 27-inch monitor with 1920x1080 resolution and 16:9 aspect ratio. It is based on AH-IPS array and is equipped with W-LED power-saving backlight. Its design might be characterized as a symbiosis of a frameless display and a stand in the form of a leg – a brand Viewsonic development. The display casing is made of dull plastic, while its stand is all about glossy plastic. Cable-management system, as well as VESA bracket, …

Introduction


There are three types of PSU: standard, partially modular and modular. Conventional power supplies are those to which most users are accustomed, such models have a large bundle of wiring tightened inside the case.There is no possibility of increasing the length of the cables, replacing them in the occasion of damage, or simply dismantling unnecessary lines. The second type is these ones to which our experimental, partially modular systems belong. There comes out a limited number of wires, and as a rule, the other cables are connected using connectors on the case. And the third option is when all the wiring are completely disconnected from the case. Modular system allows you to get rid of problems with extra wiring, taking up a lot of space inside the case and worsening air circulation. Usually such models cost a little more.


Packaging and Design


AeroCool KCAS-650M 650W is arrived in a dark package, on the front part there is a logo of the 80 PLUS Bronze …