ID yoki qurilmaning nomi bilan haydovchilar

Ma'lum qurilma: 165022367

Oxirgi ma'lum haydovchi: 23.12.2020

Ad

Gigabyte Showcases GA-Z170X Gaming 3 Mainboard

Gigabyte expands its line of gaming products with a new ATX motherboard, entitled GA-Z170X Gaming 3. The key peculiarity ascribed to the model is the support for the latest Intel Skylake-S CPU (14 nm) with LGA 1151 socket. The new-comer takes Intel Z170 chipset as the basis and draws power via 24-pin ATX as well as 8-pin EPS power sockets. Besides, the board belongs to the mainstream customer segment, so its price won’t go higher than $188.



Gigabyte GA-Z170X Gaming 3 is furnished with 7-phase VRM, four slots for DDR4-3400 MHz RAM (two-channel) of up to 64 GB capacity, a pair of PCIe 3.0 x16 slots for the installation of graphics cards (support for CrossFireX and SLI configurations), a single PCIe 3.0 x4 slot, and three PCIe 3.0 x1 slots.


Storage subsystem might be organized due to six SATA III ports (bandwidth – 6 Gb/sec), three SATA Express ports (bandwidth – up to 16 Gb/sec), and a couple of M.2 slots with bandwidth index up to 32 Gb/sec.


In addition, this …

Evga Debuts with a First-Rate ACX CPU Cooler

Evga, a company primarily known for high-end graphics solutions, decided to expand its production line by entering cooling market. Herein, it elaborated a first-rate CPU cooler, entitled ACX (codename: 100-FS-C201-KR). The new-comer features 164x134.5x91.5 mm dimensions and weighs 1065 g. Luckily, it can be already found in free sale for a price of $50.



The ACX is a tower-like air cooler that is able to efficiently remove heat from all processors that are compatible with the following sockets: Intel LGA 2011/1156/1155/1366/1150/775 and AMD FM1/FM2/AM3/AM3+/AM2/AM2+.


Evga ACX consists of an aluminum heatsink, five copper heatpipes that support Direct Touch technology, and one PWM fan of 120 mm dimensional type. The heatsink is composed of multiple thin plates, which differentiate themselves by an unusual framework. Such framework enables the emergence of two airflows around the heatpipes. According to Evga, this promotes for a better heat removal process.


The …

Spire Debuts with Gaming PC Chassis X2.6019

Spire Corporation put itself on record with a new gaming PC chassis, codenamed X2.6019. The new-comer is developed in mid-tower form-factor, featuring 520x215x508 mm dimensions, and is made of 0.6 mm cold-rolled galvanized steel (SECC). Despite medium dimensions, it might easily accommodate motherboards of miniITX, microATX and ATX standard. According to Spire, this model belongs to MOD solutions, since it ensures an easy access to the hardware components during modification or update of the system.



Spire X2.6019 houses four external bays for 5.25-inch drives, six internal bays for 3.5-inch drives, as well as seven slots for PCI expansion cards. Its internal layout is divided by linear plates into three sections; such framework promotes for a better heat removal. It should be mentioned that this chassis is able to lodge nearly any CPU cooler and any high-end graphics card. Moreover, drive mounting can be realized without any dedicated tools.


To continue, this PC chassis …
Gender: Female
Date of birth: 19 August 1956
Location: Australia, Rockingham
About me: Being an inventor has proven to be very fulfilling for me, as I designed many hundreds of inventions and products. From my many drawings of things I formed hundreds of stories. My most earnestly developed story was of a wizard boy I named Harry Potter. I am the boy named Harry Potter and as an adult I am Voldemort, Hagrid, and Dumbledore. The first story in a series I named Harry Potter and The Philosophers Stone. The stone was my heavy file full of many drawings, notes, and designs. It contained many stories in the form of story-boards and many were almost ready to produce as films or picture-books. The drawings in the Harry Potter series were delightful to look through, but the file got stolen, along with other design files, and all of my years of creative effort and genius went out of my control and into the hands of many people who have since published, presented, or produced, my inventions and stories as their own creation! Those people are what one believes are plagiarists, frauds, or simply bastards! I could not publish or market my stories or inventions without my work, but when I tell what I designed I get stupid responses to my posts. You can read more on Earnamint's Channel on YouTube.com. I have registered on Devid to get device drivers for my PC. I designed the image on XP-Pro named BLISS! That is correct. Microsoft has received some of my designs and made a fortune for the company. I still use XP as my name is on the desktop! Happy Day's, Greg Simcock, Author; Mylord My writers name is J.K. Rawling, for Joe King Rawling! It was designed to market my story of The Lion King, Finding NEMO, Harry Potter, and other stories. What I have said is true. Jo Rowling is a plagiarist!
Site: www.mylord.amplify.com/The_True_Origins_Of_Harry_Potter
Registered at: 15 July 2011, 20:55
Last visit: 16 August 2014, 11:01