The Jonsbo vendor has recently released the CR-301 RGB CPU Cooler, compatible with AMD and Intel chipsets. The solution can be used with AMD FM1, FM2, AM2, AM2+, AM3, AM3+ chips alongside with Intel LGA 775, 1155/1156/1150/1151 processors. The ultimate value of heat energy dissipated is not to overcome 135 W.

 

The construction of this product features a two-section heatsink, the fins of which are located at right angle to the base, and six heat pipes (6 mm in diameter).

 

Jonsbo supplied its specialty with two 120 mm PWM-controlled fans with the 600–1,600 rpm rotary velocity. In the meanwhile, the noise level does not overcome 25 dBA. The cooler obtained multi-coloured backlighting, offering various operation modes.

 

CR-301 RGB has the 128 × 138 × 135 mm dimensions and weighs 890 g.

Intel and AMD companies have established a good reputation for providing efficient hardware solutions for all customer groups. Each new product introduced by the two companies enters the top sales ranks and this promotes for the competition. AMD has recently produced a new APU solution based on Trinity architecture with graphics module VLIW4 and called it AMD A10-4600M. This model can boast the whole spectrum of improvements and advanced features as compared with its predecessor APU Llano, and is intended to beat its rival Intel in efficiency and performance.



Trinity Architecture


CPU Trinity is based on Piledriver micro architecture which superseded Bulldozer from AMD. The distinctive feature of Piledriver is that it’s primarily integrated in a mobile APU. Quad-core Trinity chips utilize two Bulldozer modules, each of which is equipped with two execution cores. Each APU module employs 2 MB of L2 cache, so the entire module architecture approximates to 4 MB of L2 cache; …

A few months after the release of a chassis with an entirely open-air design, Thermaltake decided to release one more modular solution but with a gaudy exterior. The Core P5 Green Edition boasts bright-green coloring of one of the side plates as well as totally transparent other panels. The middle-tower case features 608x333x570 mm dimensions, similar to its predecessor. Likewise, the greenhorn has received analogous hardware base.



Therefore, Thermaltake Core P5 Green Edition is targeting the installation of mini-ITX, micro-ATX and full ATX motherboards with up to 8 expansion slots. Internal spacing offers 4 slots for 3.5-/2.5-inch drives and allows for the installation of quite long graphics cards (up to 320 mm), high CPU coolers (up to 180 mm) and standard power supply units (up to 200 mm in length).


The chassis might be cooled down by four 120-mm or three 140-mm fans, located on the left-side panel. As an alternative to the air cooling, the user can integrate …