Swiss manufacturer of cooling systems, Arctic Cooling, has recently released a new cooler developed specifically for graphic adapters from AMD. Earlier this year the company launched the cooling system which is compatible with graphic adapters from Nvidia developers. The new product, codenamed Accelero Hybrid 7970, distinguishes from its predecessor also by the foot of water block which is upgraded to be compatible with AMD HD 7900 series.



Cooling system Accelero Hybrid 7970 consists of two parts which boast as air, so water cooling standards. It is able to manage up to 320W of hot air. The water block is cooled down by the 120 mm fan which is able to achieve the speed in the measures of 400-1350 rpm. The block, that is installed on the board, is equipped with 80 mm fan and is able to achieve from 900 to 2000 rpm speed. The noise level is dwindled down to the minimal index.


Arctic representatives claim that their new water block is 200% more efficient than the nominal …

The BenQ Co. Launches the manufacturing of its Full HD 24.5-inch monitors under the GL2580HM code name.



This specialty by BenQ obtained the ergonomic design, thin bezels and a TN matrix and the 1920 × 1080 pixels resolution. It features the 1000:1 contrast ratio (the 12 000 000:1 dynamic contrast) and the 250 cd/m2 brightness. The response time equals to 2 ms (Gray to Gray). The viewing angles of the device are 170 degrees horizontally and 160 degrees vertically.

GL2580HM has the Eye-Care technologies set implemented to protect users’ eyes from harmful impact. The BenQ Low Blue Light Plus system reduces the blue light influence and diminishes tiredness, and the Flicker-Free tech removes blinking at all brightness levels.


The panel provides the 72% coverage of the NTSC colour gamut‎. Signal sources linking is possible via HDMI, DVI-D and D-Sub interfaces.


The company is proud of its product and is ready to retail GL2580HM for 150 EUR.

SilverStone Technology, a celebrated Taiwanese PC hardware manufacturer, is going to release at the end of the current month its new mini-tower chassis codenamed SG10 that joined the SilverStone Sugo series. Featuring 354x295x220 mm dimensions, the novice is housed in a case made of stainless steel (totally black exterior and interior) with an aluminum frontal facet. The latter comprises a ventilation slot, covered by an anti-dust grid.



First of all, it should be noted that Sugo SG10 is predestined specifically for the assembling of small-sized but rather high-performance PC systems. The chassis is compatible with motherboards of mini-ITX/micro-ATX standard and is ready to welcome graphics adapters of up to 338 mm (length), PSUs of 180 mm (length), as well as CPU coolers of up to 165 mm (height). One of its key peculiarities is the localization of the power supply unit at the frontal part of the case, if compared with the majority of contemporary solutions with PSU bays at the …