The American EVGA Co. is presenting a full cover water unit for GeForce GTX 1080 Ti K|ngp|n Edition graphics accelerators. The device belongs to the Hydro Copper series and is produced under the 400-HC-5799-B1 code mark. It is already available in the overseas supplier’s authorized online store.



The novelty transfers heat away from the Nvidia GP102 GPU, memory chips and power system elements. The base of this unit is made out of nickel plated copper, and the acrylic cover is elongated to comply with the PCB video card dimensions. On the top there is a slotted decorative metal sheet with the micromesh and a logo, featuring the LED RGB backlighting, which is linked directly to the graphics card.


The cooler supply set includes all necessary mountings, alongside with thermal grease, while thermal liners are preinstalled. Fittings of the G1/4 typical size are to be purchased separately. And last, but not least: when used with the EVGA full cover specialty, GeForce GTX 1080 Ti …

TUL Corporation, in the framework of its PowerColor brand, introduces a new graphics card with quite an original way of air cooling organization. The new-coming adapter, codenamed PowerColor Radeon HD 7850 Fling Force, employs 'two-storied' cooler of an unusual structure. Along with an aluminum heatsink, copper heat pipes, and a voluminous fan, the manufacturer implemented non-monolithic fan ribs. Their tips are fixed to the main part in a way to change their location relative to the plain of rotation.



On conditions of low rotational speed, tips of the ribs are located at approximately 80 degrees angle relative to the graphics card. On conditions of heightened speed, the ribs become more linear; this way, the impeller diameter enlarges from 92 mm to 95 mm. Such structural approach to the fan framework develops into an improved performance and air cooling effect.


The model is based on Pitcairn chip, developed on Graphics Core Next architecture under 28 nm technological …

A new gaming chassis has replenished the line of PC hardware developed by Chieftec. Codenamed Dragon DX-02B, the model is designed in midi-tower form-factor and can accommodate motherboards of ATX, micro-ATX and e-ATX standard. Internal layout is predestined for the installation of eight expansion slots, and six internal bays for drives which have an access from the frontal panel. Two of those bays support hot swapping option. Besides, the casing contains four bays for 5.25-inch drives.



Dragon DX-02B is able to house graphics cards of up to 34 cm in length. It should be mentioned that one of 5.25-inch bays might be employed for the integration of 3.5-inch drive (external panel or card reader).The model supports power supply units of ATX 2.3/PS II standard, the place for which is stipulated on the chassis' base. The interface panel is introduced by two USB 2.0 ports, one USB 3.0 port, a single eSATA port, and a couple of audio-out slots.


One of the most beneficial features …