Otsi juhtide ID või seadme nime

Tuntud seadmed:161603075

Viimane teadaolev juht: 30.05.2019

Ad

The Highly Effective Galax GeForce GTX 1050 OC Graphics Accelerator

The Galax Company is ready to release the GeForce GTX 1050 OC graphics accelerator with a slight factory overclock.



This graphics card is based on the 14 nm Pascal GP107 graphics chip and features 640 streaming processors. The base and boosted core frequencies correspond to 1,366 and 1,468 MHz comparing to 1,354 and 1,455 MHz of reference units. There are 2 GB of GDDR5 memory with a 128-bit bus and with the frequency of 7,008 MHz. Being a Pascal-based device, this specialty is designed with FinFET technology and supports DirectX 12 for the fast and smooth gaming session.


The graphics accelerator is equipped with a one-fan cooling system (the diameter of the cooler is 90 mm). Displays can be connected via such ports, as DVI-D, HDMI and DisplayPort. The product takes two expansion slots in the chassis.


Galax GeForce GTX 1050 OC will be on sale since 23rd of December at the approximate price of $140.

Kingston and Adata Come up with M.2 SSDs

Within the framework of Computex 2014 both Kingston and Adata are going to introduce their fresh SSD series of M.2 form-factor. In keeping with the manufacturers’ words, the products – SM2280S2 and SR1020NP — are differentiated by some spectacular performance. At present the companies provide only basic info about the drives, leaving their fans in suspense.



Kingston SM2280S3 is based on Phison PS3108 that supports SATA 6 Gb/sec interface only. It ensures 540 MB/sec and 514 MB/sec speed on sequential Read/Write operations. For sure, it’s not the performance innovative M.2 drives should demonstrate (about 10 Gb/sec), although the model considerably surpasses traditional HDDs in this respect.


This SSD series is represented by three models of 120 GB, 240 GB and 480 GB capacity. All of them employ DDR3 cache-memory with the minimal 256 MB capacity. Besides, the difference in efficiency between other M.2 offers Kingston promises to compensate by a more affordable price.

Solid-State Drive OCZ Agility 4 Review

Up-to-date SSD manufacturers are inclined to employ MLC flash-memory with synchronous interface in their product lines. The implementation of exactly such memory interface allows balancing the advanced performance with moderate price. This is especially vital for SSDs with SATA 3 6Gb/sec interface. Nevertheless, some producers take the challenge to implement flash-memory with asynchronous interface in their drives. As a result, the final products go at more attractive price but with more modest speed characteristics. OCZ dared to overcome this speed drawback by releasing SSD Agility 4 series. The models included in the series are based on asynchronous flash-memory interface and, according to the company's words, prove to show quite decent speed index.



Chief Peculiarities


Despite the prevalence of SandForce controllers implemented in SSDs, OCZ decided to use quite different platform for its new series. Agility 4 employs Indilinx Everest 2 controllers which, in some way, …

Ports, tootjate nimekirja

Sellelt lehelt leiad nimekirja tootjate Ports, autojuht, mille saab alla laadida meie kodulehelt. Parema otsingu sobiva draiveri 877891-saadaval meie andmebaasis valige tootja oma Ports 101 esitatakse käesolevas paragrahvis.

DevID : : Ports

Ühendus väliste välisseadmete ühendamiseks arvutiga oleks võimalik ilma eriliste adapterite teostatud kujul tütar-i/o pordid emaplaadi. Need sadamad on pidevas koostöös mikroprotsessor süsteemi, mis jälgib vahetada andmeid vahel lisatud uutele seadmetele seadme ja riistvara.

Mõned adapterid eesmärk on edastada andmeid süsteemi (näiteks info klaviatuuri), samas kui teised hallata seadmeid (näiteks lugemine kettalt, aktiveerimine näitajad). Mõlemal juhul, sest tehingute teostamine vastavad draiverid, et i/o pordid.

Adapterid i/o on järjepidev ja paralleelsed. Seeria seadmetega edastavad info bitti paari juhtmeid ükshaaval, samas paralleelselt – edastavad partii mitu bitti informatsiooni korraga paralleelsetes juhtmed. Konstruktiivselt liidesed pordid on realiseeritud või mitme микросхемах, kas üks suur kiip, локализированной emaplaadi laiendada või emaplaadi.

Seadme ühendamiseks port järjestikune tüüpi, mida tavaliselt kasutavad 25-kontaktandmed ja 9-pin connectors (DB-25 ja DB-9). Lisaks sadamatele sellist tüüpi kuuluvad liidesed USB ja FireWire. Viimased pakuvad kõrgeimat edastamise kiirus, kui juht laadida, et i/o pordid all teatud seade.

Ühendus välise seadme pordiga paralleelselt tüüpi on toodetud kaudu 25-bit pistiku D-Shell ja 36 klemmiga Centronics. Maksimaalne kaabli pikkus, kus tingimata kasutatakse keerdpaar ja teejuhid ümbritsetud ekraan, tavaliselt jõuab 2-3 meetrit.

Populaarne juht kategooria Ports