Evga Launches One More Overclocked Graphics Card

Evga, a leading American supplier of 3D cards, is going to launch one more graphics card with factory overclocked speeds. A new model is based on Nvidia FeForce GTX 670 adapter and codenamed as Evga GeForce GTX 670 FTW LE. Its design resembles the one implemented in GeForce GTX 670 FTW card, but the main distinction between them is seen in frequency showings. The newbie demonstrates a bit lower frequency index than its predecessor.

Evga GeForce GTX 670 FTW LE is housed on a PCB designed for PCI-e 3.0 x16 bus. This card takes GK104 graphics core with 1344 CUDA cores as the basis; it is developed on Kepler architecture under 28 nm standards. Its inventory also embraces 2GB of GDDR5 memory (256-bit interface). Cooling system is introduced by a 2-slot cooler of active type with a single turbine-like fan. Power subsystem consists of two connection 6-pin sockets and requires a quite efficient PSU (not less than 500W power).

Frequency template looks the following way: GPU runs at …

Graphics Card Asus Matrix-HD7970-P-3GD5 Review

Model Matrix-HD7970-P-3GD5 is supposed to be the most powerful graphics card delivered by Asus that is based on Tahiti chip. This card belongs to Matrix series targeting primarily gamers and overclockers. In addition, Radeon HD 7970 is one of the most highly-productive adapters with a striking overclocking potential. Thus, Asus has managed to implement both performance and power in a single product to provide for the utmost results and utmost convenience.


Graphics card from Asus features similar to other Matrix-series models design. Its frontal panel consists of a large cooler with two voluminous fans. This cooling system is covered by a shroud with red insertions. Its rear panel accommodates a perforated plate that leaves bare only a few zones on a textolite (CrossFire sockets, iROG controller, VGA Hotwire zone); spacing under the cooler is covered by a thick plate-heatsink that prevents textolite deformation. The side panel contains a pair of 8-contact power …

Deepcool Introduces a Universal IceEdge 400 E CPU Cooler

Deepcool Industries, a well-known Chinese designer of multifarious cooling solutions, is going to launch its newest universal CPU cooler, entitled IceEdge 400 E (Elite Edition). The new-comer has got a tower-type design and features 100x86x125.5 mm dimensions.

This model is predestined to be incorporated into all contemporary platforms, including Intel’s LGA775/1150/1155/1156 and AMD’s 754/939/940/FM1/FM2/AM2(+)/AM3(+). Moreover, it is able to cool down rather hot processors, which TDP level reaches 130 W.

Deepcool IceEdge 400 E consists of a heatsink block, featuring thin aluminum plates, four copper heatpipes that support direct contact technology, and a single 92 mm fan. The latter is based on a fluid bearing and develops speed up to 2200 RPM. The maximal noise level it is producing approximates 26 dB. The fan is fixed due to wire spikes.

Pricing and release date are still unknown.
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code


  • 1394
  • HDC
  • NET
  • USB