The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …

Gigabyte to Unveil a High-End Graphics Card GV-N770OC-2GD

Gigabyte has enriched its arsenal of graphics solutions with a new card, based on GeForce GTX 770 adapter. Graphics card GV-N770OC-2GD is a modified version of an etalon product that might offer a whole spectrum of capabilities that attract potential customers so much. Outstanding performance, factory overclocking, high-quality hardware basis, and an upgraded cooling system, codenamed Windforce 3X 450W, make this product a cherished acquirement.



Gigabyte GV-N770OC-2GD is based on GK104 graphics core, designed under 28 nm Kepler micro-architecture. This GPU features 1536 CUDA cores, 128 TMUs and 32 ROPs. Its nominal clock frequency makes up 1137 MHz, while the support of GPU Boost 2.0 technology overclocks the card up to 1187 MHz.


Upon the whole, this card employs PCI Express 3.0 x16 interface and houses two additional PCI power sockets (6-contact and 8-contact). A panel of external interfaces boasts the availability of four video outputs, including DisplayPort, HDMI, DL …

Asus to Start Shipping Radeon R9 290 DirectCU II OC Graphics Card

Next week Asus is going to start shipping its newest graphics card from Radeon R9 series. Codenamed Radeon R9 290 DirectCU II OC, it is based on an original PCB with black-and-red design and the incorporation of an exclusive DirectCU II cooling system. Plus, the availability of ‘OC’ in the codename implies the availability of factory overclocking.



Asus Radeon R9 290 DirectCU II OC takes GCN Hawaii core with 2816 stream processors as the basis. It operates at an overclocked 1000 MHz frequency. The model is equipped with 4 GB of GDDR5 memory (512-bit bus) that runs at an effective 5400 MHz frequency. Just for a comparison, etalon adapter from AMD runs at 947 MHz/ 5000 MHz for GPU/memory correspondingly.


DirectCU II cooler consists of a heatsink, four copper nickel-plated heatpipes (two of them feature 10 mm dimensions), and two high-performance fans: one ordinary and one CoolTech. The card receives power via 6+8-pin connectors and might require not less than 600 W PSU.
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

TOSHIBA Portable PC

  • BATTERY
  • CDROM
  • COMPUTER
  • DISKDRIVE
  • HDC
  • KEYBOARD
  • MEDIA
  • MODEM
  • MOUSE
  • NET
  • OTHER DEVICES
  • PCMCIA
  • PORTS
  • PROCESSOR
  • SYSTEM
  • UNKNOWN
  • USB
  • VOLUME